STAMP-PLUS inherits existing capabilities and components of the current Remote Weapon Systems (RWS), namely 12.7mm STAMP and 30mm SMASH of ASELSAN, to cover a variety of missions and operational concepts.

STAMP-PLUS is built on the legacy of STAMP baseline and enhanced its capabilities with a High Accuracy Stabilized Gimbal (HASG) integrated electro-optic (EO) suit.

STAMP-PLUS features are:

• Stabilized and remotely operated naval weapon system, suitable to be installed on a range of naval vessels from Fast Interceptors to Corvettes, Frigates and Landing Platform Docks

• Built with an independent, high accuracy and stabilized gimbal on the turret to perform in a variety of operational environments and missions

• Real Time operating System

• Effective in day and night conditions for warfare with a diverse threat set up to: Surface Threats (Sea and Land) up to 60 knots with high manoeuvring capability; Air Threats up to 200 knots; Man target

• Automatic target tracking with two-axis stabilized turret under adverse weather and sea conditions

• Fire Control Computation

• Ballistic Calculations

• Zeroing and Parallax Correction

• Probable Hit Point Calculaions

• Lead Angle Compensation

• Own ship attitude compensation

• Lead Angle Compensation

• Temperature, Wind, Pressure Compensation

• Automatic slew-to-target capability assigned from the existing Combat Management System (CMS) and sensors of the ship

• Network integration (multiple RWS)

• Start-up time of the system is less than 1 (one) minute

• Manual back-up mode

• Minimum radar cross-section

• Minimum (except for the cabling) penetration on platform

• Built-in-Test (BITE) capability

• Modular structure and open hardware architecture for potential mid-life upgrades and optional improvements

• Ergonomic Operator Console Design (MIL-STD-1472G compliant)

• Operator Console enables the Operator to offset the firing aim point when tracking threats and targets

• System incorporates firing circuit interrupts and a firing enable key

• Adjustable software no-fire zones; mechanical movement and firing cut-outs for training, elevation and depression

• Collecting basket for casings, rounds and links ejected from the weapon

• Adjustable shot group quantitiy selection (1-3-5-10-20 or Continuous)

• Reduced rate of fire (150 rpm)

• Counting the fired rounds and Low Ammo Warning

• Warning Buzzer for Servo Active and Weapon is ready to fire (optional)

• Operating the system from multiple locations

• Operator Console selector switch allows selection of the desired RWS mount

• System operates at a reduced level of performance (non-stab mode, only TV camera mode, no LRF mode, back-up battery mode, manuel mode etc.) in the event of a critical failure

• System is covered to protect functional components of the mounted weapon

• System is built to withstand exposure to conditions up to and including Sea State 7

• System has an operational life expectancy of 25 years

• Technology Readiness Level 9

STAMP-PLUS EO suit with HASG features are:

• The HASG provides even higher hit probability and surveillance capability compared to configurations where EO suit is fixed

• HASG allows the operator to conduct fall of shot observation at a range of at least 1500 meters while using 0.50 Caliber tracer ammunition

• Surveillance mode (Surveillance without pointing the gun)

• System maintains the threat at the centre of the Operator Display when the fire control solution is applied

• Operator controlled de-icing system to melt accumulated ice on EO suit

• Gun

• Fire Control Computer

• Servo Motors

• EO suit (Day TV, Thermal Imaging Camera and LRF)

• HASG

• Operator Console with display and controls

• Turret

• Battery and Battery Charger

• Video Recorder (Optional)

• 7.62mm C6, FN

• 12.7mm M2HB, M2A2

• 40mm Grenade Launcher

• Elevation Angle : -20⁰/+55⁰

• Traverse Angle : n x 360⁰

• Elevation Speed (max.) > 60⁰/s

• Traverse Speed (max.) >60⁰/s

• Ammunition Stowage (12.7 mm) : 200 rounds (400 rounds optional)

• Ammunition Stowage (7.62mm) : 500 rounds, (1000 rounds optional)

• Power Supply : 24 V DC

• Back-up battery: 2 hours stand-by, full-capability 40 minutes at 20⁰ C

Day Camera:

• Detection Range: > 5 km. (man target, STANAG 4512) ; > 10 km. (2 m2 vehicle)

• Identification Range: > 1.8 km. (man target, STANAG 4512) ; > 3 km. (2 m2 vehicle)

Day TV camera with variable continuous zoom and a color mode:

• Horizontal FOV: 2⁰ to 40⁰

• Horizantal FOV : 2.2⁰ to 62⁰ (optional)

Thermal Imaging Camera:

• Detection Range: > 5 km. (man target, STANAG 4512) ; > 10 km. (2 m2 vehicle)

• Identification Range: > 1.8 km. (man target, STANAG 4512) ; > 3 km. (2 m2 vehicle)

• Extra Narrow FOV: 0.9⁰

• Narrow FOV: 3⁰

• Medium FOV: 7⁰

• Wide FOV: 17.5⁰

• Eye-safe Class 1 Laser Range Finder (LRF), i.e. ANSI Z136.1, with an accuracy of +/- 5 m and effective range of 20 km

• Jet wash system to clean debris

HASG:

• Elevation Angle: -20⁰/+55⁰ (fully independent)

• Azimuth Angle : -10⁰/+10⁰

• Angular Speed: greater than 60°/s

• Above-deck temperature: -32⁰/+50⁰ C

• Below-deck temperature: 0⁰/+40⁰ C

• 95% humidity condensing environment

• Solar environment (MIL-STD-810G, method 505.6 Procedure II)

• Rainfall conditions (0.8 millimetres per minute)

• Dust concentrations (1 gram per cubic metre)

• Resistant to sea state spray conditions (MIL-STD-108E)

• Galvanic compatible materials against oxidation and corrosion

• Resistant to the effects of salt deposits (method 509.6 of MIL-STD-810G)